Problema Disco Duro

[codeman1234]

Buenas,

Mi disco duro a empezado a dar unos problemas. Se queda trabado por unos segundos y todas mis aplicaciones se quedan congeladas durante esos segundos. He intando arreglarlo con fcsk pero no consigue arreglarmelo.

Al iniciar Debian me da salen los siguientes errores en dmesg:

8.396236] Adding 2650684k swap on /dev/sdb5. Priority:-1 extents:1 across:2650684k
[ 8.552733] EXT3 FS on sdb1, internal journal
[ 8.711292] loop: module loaded
[ 8.810559] [drm] Initialized drm 1.1.0 20060810
[ 8.815678] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.815821] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[ 8.857047] radeonfb: Found Intel x86 BIOS ROM Image
[ 8.857055] radeonfb: Retrieved PLL infos from BIOS
[ 8.857059] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
[ 8.857063] radeonfb: PLL min 20000 max 40000
[ 8.953012] i2c-adapter i2c-1: unable to read EDID block.
[ 9.105004] i2c-adapter i2c-1: unable to read EDID block.
[ 9.257003] i2c-adapter i2c-1: unable to read EDID block.
[ 9.788012] radeonfb: Monitor 1 type CRT found
[ 9.788016] radeonfb: EDID probed
[ 9.788019] radeonfb: Monitor 2 type no found
[ 9.800030] Console: switching to colour frame buffer device 160x64
[ 9.820911] radeonfb (0000:01:00.0): ATI Radeon 4153 "AS"
[ 10.016317] fuse init (API version 7.11)
[ 10.187184] kjournald starting. Commit interval 5 seconds
[ 10.187360] EXT3 FS on sda1, internal journal
[ 10.187367] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.116248] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.144523] wlan0: authenticate with AP 00:1a:2b:07:a2:c5
[ 13.145910] wlan0: authenticated
[ 13.145915] wlan0: associate with AP 00:1a:2b:07:a2:c5
[ 13.148127] wlan0: RX AssocResp from 00:1a:2b:07:a2:c5 (capab=0x411 status=0 aid=1)
[ 13.148131] wlan0: associated
[ 13.148686] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.684114] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 17.684187] ata2.00: BMDMA stat 0x64
[ 17.684241] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 17.684243] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 17.684390] ata2.00: status: { DRDY ERR }
[ 17.684437] ata2.00: error: { UNC }
[ 17.684492] ata2: hard resetting link
[ 18.004066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.028364] ata2.00: configured for UDMA/133
[ 18.028377] ata2: EH complete
[ 21.578888] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 21.578959] ata2.00: BMDMA stat 0x64
[ 21.579011] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 21.579012] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 21.579159] ata2.00: status: { DRDY ERR }
[ 21.579206] ata2.00: error: { UNC }
[ 21.579260] ata2: hard resetting link
[ 21.896062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.920364] ata2.00: configured for UDMA/133
[ 21.920377] ata2: EH complete
[ 23.340004] wlan0: no IPv6 routers present
[ 25.493602] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 25.493672] ata2.00: BMDMA stat 0x64
[ 25.493723] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 25.493725] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 25.493872] ata2.00: status: { DRDY ERR }
[ 25.493919] ata2.00: error: { UNC }
[ 25.493974] ata2: hard resetting link
[ 25.812064] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 25.836342] ata2.00: configured for UDMA/133
[ 25.836355] ata2: EH complete
[ 29.461124] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 29.461937] ata2.00: BMDMA stat 0x64
[ 29.462754] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 29.462756] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 29.464503] ata2.00: status: { DRDY ERR }
[ 29.465370] ata2.00: error: { UNC }
[ 29.466247] ata2: hard resetting link
[ 29.784061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 29.808350] ata2.00: configured for UDMA/133
[ 29.808362] ata2: EH complete
[ 33.405701] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 33.406626] ata2.00: BMDMA stat 0x64
[ 33.407557] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 33.407559] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 33.409537] ata2.00: status: { DRDY ERR }
[ 33.410518] ata2.00: error: { UNC }
[ 33.411516] ata2: hard resetting link
[ 33.728061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.752363] ata2.00: configured for UDMA/133
[ 33.752374] ata2: EH complete
[ 37.333740] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 37.334784] ata2.00: BMDMA stat 0x64
[ 37.335830] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 37.335832] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 37.338041] ata2.00: status: { DRDY ERR }
[ 37.339139] ata2.00: error: { UNC }
[ 37.340261] ata2: hard resetting link
[ 37.660060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 37.684357] ata2.00: configured for UDMA/133
[ 37.684371] sd 1:0:0:0: [sdb] Unhandled sense code
[ 37.684375] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 37.684379] sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
[ 37.684385] Descriptor sense data with sense descriptors (in hex):
[ 37.684388] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 37.684400] 0f e7 21 10
[ 37.684405] sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
[ 37.684413] end_request: I/O error, dev sdb, sector 266805520
[ 37.685569] ata2: EH complete
[ 41.289752] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 41.290917] ata2.00: BMDMA stat 0x64
[ 41.292092] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 41.292094] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 41.294461] ata2.00: status: { DRDY ERR }
[ 41.295636] ata2.00: error: { UNC }
[ 41.296837] ata2: hard resetting link
[ 41.616062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 41.640387] ata2.00: configured for UDMA/133
[ 41.640398] ata2: EH complete
[ 45.218062] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 45.219286] ata2.00: BMDMA stat 0x64
[ 45.220532] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 45.220534] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 45.223054] ata2.00: status: { DRDY ERR }
[ 45.224318] ata2.00: error: { UNC }
[ 45.225592] ata2: hard resetting link
[ 45.544061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 45.568363] ata2.00: configured for UDMA/133
[ 45.568374] ata2: EH complete
[ 49.156267] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 49.157559] ata2.00: BMDMA stat 0x64
[ 49.158853] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 49.158855] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 49.161535] ata2.00: status: { DRDY ERR }
[ 49.162833] ata2.00: error: { UNC }
[ 49.164124] ata2: hard resetting link
[ 49.484061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 49.508364] ata2.00: configured for UDMA/133
[ 49.508374] ata2: EH complete
[ 53.071206] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 53.072529] ata2.00: BMDMA stat 0x64
[ 53.073833] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 53.073835] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 53.076506] ata2.00: status: { DRDY ERR }
[ 53.077827] ata2.00: error: { UNC }
[ 53.079143] ata2: hard resetting link
[ 53.396061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 53.420342] ata2.00: configured for UDMA/133
[ 53.420353] ata2: EH complete
[ 57.015029] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 57.016380] ata2.00: BMDMA stat 0x64
[ 57.017705] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 57.017707] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 57.020397] ata2.00: status: { DRDY ERR }
[ 57.021720] ata2.00: error: { UNC }
[ 57.023024] ata2: hard resetting link
[ 57.340060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 57.364385] ata2.00: configured for UDMA/133
[ 57.364396] ata2: EH complete
[ 60.948624] ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 60.949960] ata2.00: BMDMA stat 0x64
[ 60.951294] ata2.00: cmd c8/00:08:0f:21:e7/00:00:00:00:00/ef tag 0 dma 4096 in
[ 60.951296] res 51/40:01:10:21:e7/00:00:00:00:00/ef Emask 0x9 (media error)
[ 60.954004] ata2.00: status: { DRDY ERR }
[ 60.955337] ata2.00: error: { UNC }
[ 60.956660] ata2: hard resetting link
[ 61.276061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 61.300344] ata2.00: configured for UDMA/133
[ 61.300356] sd 1:0:0:0: [sdb] Unhandled sense code
[ 61.300359] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 61.300364] sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
[ 61.300369] Descriptor sense data with sense descriptors (in hex):
[ 61.300372] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 61.300384] 0f e7 21 10
[ 61.300389] sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
[ 61.300397] end_request: I/O error, dev sdb, sector 266805520
[ 61.301738] ata2: EH complete

Alguna idea como puedo solucionarlo?

saludos y gracias

[AleSanchez]

Haciendo backup y comprando otro disco antes de que se termine de romper.

Saludos.

[codeman1234]

Iniciado por AleSanchez

Haciendo backup y comprando otro disco antes de que se termine de romper.

Saludos.

Con que aplicacion hago back up o una imagen de disco? Y si lo hago y vuelvo a cargar la imagen de disco despues de formatearlo, me volvera a aparecer este problema?


Saludos y gracias por responder

[kr4k3r]

ojea esto:
linuxzone.es/2009/01/08/copias-de-seguridad-en-gnulinux/#more-3862

[larva_pro]

Solo guarda tus cosas en alguna parte ya sean DVD , o otro disco duro .

ese disco duro ya esta por morir no hay nada que hacer. mas que comprar uno y remplazarlo.

haz el back up antes de que no puedas.