Duda en packet tracer

[alesita88]

HOLA SOY NUEVA EN EL FORO ME GUSTARIA QUE ME AYUDARAN ESTOY CONFIGURANDO 3 ROUTER PERO AL MOMENTO DE HACER PING DE LA PC DE REDES AL ROUTER LAB DE COMPUTO NO LO HACE ESA ES LA UNICA Q NO MANDA PING LES AGRADECECERIA QUE ME AYUDARAN LOS CODIGOS SON LOS SIG
LAB COMPUTO
Router>ENABLE
Router#CONFIG TERM
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#HOSTNAME LABCOMPUTO
LABCOMPUTO(config)#INT F0/0
LABCOMPUTO(config-if)#IP ADDRESS 192.168.1.1 255.255.255.0
LABCOMPUTO(config-if)#NO SHUTDOWN

LABCOMPUTO(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

LABCOMPUTO(config-if)#EXIT
LABCOMPUTO(config)#INT S0/3/0
^
LABCOMPUTO(config-if)#IP ADDRESS 10.0.0.1 255.0.0.0
LABCOMPUTO(config-if)#CLOCK RATE 56000
LABCOMPUTO(config-if)#NO SHUTDOWN

%LINK-5-CHANGED: Interface Serial0/3/0, changed state to down
LABCOMPUTO(config-if)#EXIT
LABCOMPUTO(config)#INT S0/2/0
LABCOMPUTO(config-if)#IP ADDRESS 11.0.0.1 255.0.0.0
LABCOMPUTO(config-if)#CLOCK RATE 56000
LABCOMPUTO(config-if)#NO SHUTDOWN

%LINK-5-CHANGED: Interface Serial0/2/0, changed state to down
LABCOMPUTO(config-if)#

LABREDES
System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: NO


Press RETURN to get started!



Router>ENABLE
Router#CONFIG TERMINAL
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#HOSTNAME LABREDES
LABREDES(config)#INT F0/0
LABREDES(config-if)#IP ADDRESS 192.168.2.1 255.255.255.0
LABREDES(config-if)#NO SHUTDOWN

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

LABREDES(config-if)#EXIT
LABREDES(config)#INT S0/3/0
LABREDES(config-if)#IP ADDRESS 10.0.0.2 255.0.0.0
LABREDES(config-if)#NO SHUTDOWN

%LINK-5-CHANGED: Interface Serial0/3/0, changed state to up

LABREDES(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/3/0, changed state to up

LABELECTRO
--- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: NO


Press RETURN to get started!



Router>ENABLE
Router#CONFIG TERM
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#HOSTNAME LABELECTRO
LABELECTRO(config)#INT F0/0
LABELECTRO(config-if)#IP ADDRESS 192.168.3.1 255.255.255.0
LABELECTRO(config-if)#NO SHUTDOWN

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

LABELECTRO(config-if)#EXIT
LABELECTRO(config)#INT S0/3/0
LABELECTRO(config-if)#IP ADDRESS 11.0.0.2 255.0.0.0
LABELECTRO(config-if)#NO SHUTDOWN

%LINK-5-CHANGED: Interface Serial0/3/0, changed state to up

LABELECTRO(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/3/0, changed state to up


RIP
LABCOMPUTO LABCOMPUTO>ENABLE
LABCOMPUTO#CONFIG TERMINAL
Enter configuration commands, one per line. End with CNTL/Z.
LABCOMPUTO(config)#ROUTER RIP
LABCOMPUTO(config-router)#NETWORK 10.0.0.0
LABCOMPUTO(config-router)#NETWORK 11.0.0.0
LABCOMPUTO(config-router)#NETWORK 192.168.1.0
LABCOMPUTO(config-router)#VERSION 2
LABCOMPUTO(config-router)#

LABREDES>ENABLE
LABREDES#CONFIG TERMINAL
Enter configuration commands, one per line. End with CNTL/Z.
LABREDES(config)#ROUTER RIP
LABREDES(config-router)#NETWORK 10.0.0.0
LABREDES(config-router)#NETWORK 192.168.2.0
LABREDES(config-router)#VERSION 2
LABREDES(config-router)#

LABELECTRO>ENABLE
LABELECTRO#CONFIG TERMINAL
Enter configuration commands, one per line. End with CNTL/Z.
LABELECTRO(config)#ROUTER RIP
LABELECTRO(config-router)#NETWORK 11.0.0.0
LABELECTRO(config-router)#NETWORK 192.168.3.0
LABELECTRO(config-router)#VERSION 2
LABELECTRO(config-router)#

AYUDENME XFASSSSS