31/07/2004, 13:58
|
 | | | Fecha de Ingreso: julio-2004
Mensajes: 130
Antigüedad: 20 años, 6 meses Puntos: 0 | |
| estas son las unicas settings del jumper:
(Master) - A jumper placed over the DS pins configures the drive as a Master. (Slave) - No jumper is required to configure the drive as a Slave. (Cable Select) - A jumper placed over the CS pins configures the drive for Cable Select. (Master with CLJ) - A jumper placed over the DS pins configures the drive as a Master. The jumper over the CLJ (Cylinder Limitation Jumper) pins limits the drive’s storage capacity. (Slave with CLJ) - No jumper is required to configure the drive as a Slave. The jumper over the CLJ (Cylinder Limitation Jumper) pins limits the drive’s storage capacity. (Cable Select with CLJ) - A jumper placed over the CS pins configures the drive for Cable Select. The jumper over the CLJ (Cylinder Limitation Jumper) pins limits the drive’s storage capacity.
además.. ya hice las demas pruebas.. pero no te respondí porque salieron bien, o sea que esas no son el problema, el problema esta entre el jumper o algun conflicto con el otro hdd |