Buenas tengo un problema con mi tarjeta inalambrica Broadcom 4313
escribo en consola #lspci y me muestra
Código:
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
aqui todo bien pero intento hacer #ifconfig y muestra esto
Código:
em1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether ec:9a:74:45:1c:06 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.74 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::e6d5:3dff:fe02:c7ec prefixlen 64 scopeid 0x20<link>
ether e4:d5:3d:02:c7:ec txqueuelen 1000 (Ethernet)
RX packets 175817 bytes 234997699 (224.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 155212
TX packets 121736 bytes 11572716 (11.0 MiB)
TX errors 12 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 84 bytes 6172 (6.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 84 bytes 6172 (6.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
necesito que aparesca wlan0 y no se si es un error de mi tarjeta BCM o algo en fedora KDE