ah, orale, pues si me reconoce el cd-rom en la bios, me aparece el disco duro que instale y el cd-rom que ya tenia, lei en una pagina que para instalar el windows como quiero hacerlo, si el disco no es booteable, se tiene que entrar con soporte cd-rom, pero no se muy bien como, osea en que parte se elige esta opcion, se me ocurrio que a lo mejor no entra asi y por eso no puedo acceder al disco, bueno, los pasos que encontre en esa pagina son estos:
If your system does not support Booting from CD, follow these steps:
1. Insert both the Windows CD and the Start-up floppy disk [use the Windows ME OEM disk for this].
2. Reboot
3. choose 2: Boot with CDROM support. <---- ESTO
4. Once your system arrives at the command prompt, change to your CD-drive letter (which will be different for each user, depending upon your particular partition setup). For example, if your CD is your K: drive, type: "k:" (without quotes) and hit the <Enter> key. The command prompt will change to K:\> [or whatever drive letter you entered]. You might have to add an extra letter for the RAM drive that gets created.
Note: if you have plenty of disk space available, you could copy the entire Windows CD to a location on your hard drive [such as a folder named "wxp"] and execute the Windows set-up program from there.
5. Type "setup" (without quotes) and hit the <Enter> key. You're there. Follow the instructions. Windows 2000 and XP give you the option to format any partition before installing the O/S.
Cita: Esto se logra cuando bajo DOS has configurado tu tarjeta de RED y está se encarga de ir a buscar un servidor de donde copiar e instalar el S.O. e incluso cuando instalar linux en red lo que haces es un disco de inicio en RED el cual reconoce que tarjeta de RED tienes y la configura para que le puedas dar un rango IP que coincidad con el el rango del Servidor y Busque los archivos de instalación.
Entonces podria hacer la instalacion desde otra maquina conectando con cable cruzado?? no seria mucho problema??