USB:
Cable Rojo = USB_PWR
Cable Blanco = P-
Cable Verde = P+
Cable Negro = GND
Cada uno de esos puertos USB tiene 4 cables (a veces también se incluye otro cable negro DUMMY, pero no es el caso)
Tendrás dos grupos de 4 cables (rojo, blanco, verde, negro)
AUDIO:
1 naranja que dice Mic-in = MIC_2L
1 negro que dice GND = GND
1 blanco SpeakoutR = OUT_2R
1 azul SpeakoutL = OUT_2L
Cita: If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
F. Enter Windows system. Click the icon on the lower right hand
taskbar to enter Realtek HD Audio Manager. Click “Audio I/O”, select
“Connector Settings” , choose “Disable front panel jack
detection”, and save the change by clicking “OK”.