Y si agrego a pelo en el interfaces:
auto eth1
iface eth1 inet static
address 192.168.1.51
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 212.145.4.97 212.145.4.98
dns-search es
??
No funcionaría? Porque con
Me sale
Cita: Bus 0, device 0, function 1:
Host bridge: ServerWorks GCNB-LE Host Bridge (#2) (rev 0).
Bus 0, device 2, function 0:
Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 2).
IRQ 17.
Master Capable. Latency=32. Min Gnt=255.
Non-prefetchable 32 bit memory at 0xfe100000 [0xfe11ffff].
I/O at 0xecc0 [0xecff].
Bus 0, device 3, function 0:
Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 120).
IRQ 18.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0xec00 [0xec7f].
Non-prefetchable 32 bit memory at 0xfe122000 [0xfe12207f].
Bus 0, device 8, function 0:
VGA compatible controller: ATI Technologies Inc Rage XL (rev 39).
Master Capable. Latency=32. Min Gnt=8.
Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff].
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xfe121000 [0xfe121fff].
Bus 0, device 14, function 0:
IDE interface: PCI device 1166:0217 (ServerWorks) (rev 160).
IRQ 11.
Master Capable. Latency=64.
I/O at 0x1e8 [0x1ef].
I/O at 0x3ec [0x3ef].
I/O at 0x168 [0x16f].
I/O at 0x36c [0x36f].
I/O at 0x900 [0x90f].
Bus 0, device 15, function 0:
Host bridge: ServerWorks CSB6 South Bridge (rev 160).
Master Capable. Latency=32.
Bus 0, device 15, function 1:
IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev 160).
Master Capable. Latency=64.
I/O at 0x8b0 [0x8bf].
Bus 0, device 15, function 2:
USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 5).
IRQ 3.
Master Capable. Latency=32. Max Lat=80.
Non-prefetchable 32 bit memory at 0xfe120000 [0xfe120fff].
Bus 0, device 15, function 3:
ISA bridge: ServerWorks GCLE-2 Host Bridge (rev 0).
Que en negrita aparece la 3com, pero no se como identificarla como eth1