03/04/2006, 10:56
|
 | | | Fecha de Ingreso: agosto-2001 Ubicación: Australia
Mensajes: 384
Antigüedad: 23 años, 3 meses Puntos: 0 | |
Pos va a ser que no :(
Código:
cat /proc/bus/usb/devices
...
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04e8 ProdID=120f Rev= 1.00
S: Manufacturer=SAMSUNG Electronics Co., Ltd.
S: Product=SAMSUNG CAMCORDER
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 100 Ivl=1ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 300 Ivl=1ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 500 Ivl=1ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 700 Ivl=1ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 900 Ivl=1ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
...
dmes:
[4296554.564000] usb 2-2: new full speed USB device using ohci_hcd and address 4
Alguna idea? |