Configurar módem usb adsl

[DjNelson]

Vale, esto es lo que he hecho:

linux:/home/Juan # eaglestat
eagle-usb status display
-------------------------------------------------------------
Driver version 2.3.2 Chipset: Eagle0
Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x4106
USB Bus : 003 USB Device : 002 Dbg mask: 0x0
Ethernet Interface : <NULL>
MAC: 00:30:da:22:06:02
Tx Rate 0 Rx Rate 0
FEC 0 Margin 0 Atten 0 dB
VID-CPE 0 VID-CO 0 HEC 0
VPI 0 VCI 0 Delin GOOD
Cells Tx 0 Cells Rx 0
Pkts Tx 0 Pkts Rx 0
OAM 0 Bad VPI 0 Bad CRC 0
Oversiz. 0

Modem waiting for driver response.
Please send DSP (eaglectrl -d)

linux:/home/Juan # eaglectrl -d
CMVs successfully sent to driver.
Options successfully sent to driver.
Using DSP code for POTS line
DSP code successfully loaded.



linux:/home/Juan # eaglestat
eagle-usb status display
-------------------------------------------------------------
Driver version 2.3.2 Chipset: Eagle0
Vendor ID : 0x1110 Product ID : 0x900f Rev: 0x4106
USB Bus : 003 USB Device : 002 Dbg mask: 0x0
Ethernet Interface : eth0
MAC: 00:30:da:22:06:02
Tx Rate 320 Rx Rate 1024
FEC 0 Margin 18 Atten 37 dB
VID-CPE 57 VID-CO 28 HEC 0
VPI 8 VCI 32 Delin GOOD
Cells Tx 0 Cells Rx 0
Pkts Tx 0 Pkts Rx 0
OAM 0 Bad VPI 0 Bad CRC 0
Oversiz. 0

Modem is operational

____________________________________________

linux:/home/Juan # ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:70 errors:0 dropped:0 overruns:0 frame:0
TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5150 (5.0 Kb) TX bytes:5150 (5.0 Kb)
--------------------------------------------------

linux:/home/Juan # startadsl
linux:/home/Juan # startadsl

La conexión parece ya activa!

linux:/home/Juan # ping 192.165.2.22
connect: Network is unreachable

Es decir, que todo va bien excepto... que no funciona :(

Saludos.