
11/07/2005, 14:49
|
 | Colaborador | | Fecha de Ingreso: abril-2003
Mensajes: 12.106
Antigüedad: 21 años, 10 meses Puntos: 25 | |
http://www.epanorama.net/documents/p...connector.html
Código:
Pin Funtion Wire color
1. Power Good * Orange
2. +5Vdc Red
3. +12Vdc Yellow
4. -12Vdc Blue
5. Ground Black
6. Ground Black
7. Ground Black
8. Ground Black
9. -5Vdc White
10. +5Vdc Red
11. +5Vdc Red
12. +5Vdc Red
Cita: NOTE: The colour information is just given as general reference. There is no strict standard for colouring so actual colouring used in your computer might be different !
* Power good pins gives +5V output when the voltage in the power supply outputs is according the specs. This power good pin is usually used for resetting purposes so that the motherboard reset signal is kept active until the power good signal is raised to +5V. This keeps the motherboard not trying to do anything before the operating voltages have stabilized. Some motherboards will only work if +5V is applied to the power good pins slightly after the power is turned on on other pins.
__________________ "El hombre, en su orgullo, creó a Dios a su imagen y semejanza."Friedrich Nietzsche |